Procedures For Installing And Operating A Jet Dispenser

1. Steps for installing and operating the jet dispensing machine Before starting the machine, check whether the automatic dispensing machine is clean, has moisture, and other problems that directly affect the normal operation of the machine.
2. In the working state, it is not allowed to touch the dispensing head, needle nozzle, guide chain and other moving parts with your hands to prevent pinching accidents.
3. If special circumstances are found, you can press the red emergency button on the front of the fuselage to stop the machine immediately.
4. When the equipment needs to be moved, the gas path and power supply must be cut off before proceeding.
5. Do not pile too many things next to the machine to avoid improper operation.
6. It is necessary to wear gloves when working, and try not to expose the skin to avoid adverse factors from the glue on the body.
7. When operating glue, you must have an understanding of the glue, the use of the jet dispensing machine, how to use it normally, so that it can be operated normally.
8. Regularly inspect the safety performance of the automatic dispensing machine.
9. Do not put anything on the workbench and keep it clean.
10. When not in use for a long time, cut off the power supply of the jet dispenser.