Operation Precautions For Silicone Dispensing Machine

The precautions for using the silicone dispenser are as follows:
1. The importance of instructions
Before using the silicone glue dispenser, please read the instruction manual carefully to ensure the correct use of the system. Please keep the manual properly so that you can refer to it at any time. The overview is subject to the corresponding operation function.
2. Non-professionals are not allowed to repair and debug
Please do not repair and debug the electrical system by non-professionals, this will reduce the safety performance of the equipment, expand the fault, and even cause personal injury and property loss. Please do not accumulate sundries around the control box, and during use, regularly remove the dust on the surface of the control box and the filter to keep the system well ventilated and conducive to heat dissipation.
3. Matters needing attention in the use of silicone glue dispenser
When it is clear that it is necessary to open the cover of the chassis, it is only allowed to touch the components in the electric control box after 5 minutes after cutting off the power supply and under the guidance of professionals. When the silicone dispensing machine is working, it is forbidden to touch any moving parts or open the control equipment, otherwise it may cause personal injury or cause the machine to malfunction! It is forbidden to operate electrical equipment in places with humidity, dust, corrosive gases, and flammable and explosive gases Otherwise, it may cause electric shock or fire.