Analysis Of Maintenance Knowledge Of Visual Dispensing Machine

The quality of daily maintenance directly affects the service life of the dispenser. The maintenance knowledge of the visual dispenser daily work has a great influence on the service life, including the smoothness of the normal use process. The following are the daily maintenance steps:
1. To replace the rubber type, the pipeline needs to be cleaned. At this time, first close the feed valve, open the discharge valve, and discharge the remaining rubber material in the rubber bucket, close the discharge valve, open the feed valve, pour the cleaning solvent into the rubber storage tank, activate the machine, and press the solvent out according to the usual operation method. out rinse.
2. If the air intake is abnormal and there is water vapor, please remove the water vapor in the pressure regulating filter or check whether there is any abnormality in the air pressure source. Before using the visual glue machine in large quantities, please try it out in a small amount first to master the skills of using the product to avoid mistakes. When there is no problem in the test, then use the double-liquid dispensing machine or double-liquid glue filling machine for mass production; The vacuum system vacuumizes the glue to remove bubbles to remove the bubbles generated during the mixing process, or let it stand for 10-20 minutes before using it, so that the bubbles generated during mixing can be removed in time, and the more glue mixed together.
3. Please wipe clean the machine part regularly to increase the service life. The more the amount of glue mixed together, the faster the reaction and the faster the curing speed, so the glue should be properly mixed according to the actual production situation, otherwise the glue will be wasted. Eliminate accidents and improve production efficiency. Nowadays, liquid control technology and dispensing equipment are widely used in various production fields in modern industry.
4. When the machine is not in use for a long time, the power supply should be unplugged, which will not only prolong the life of the machine but also save a lot of electricity bills. With the needs of ever-changing industrial development, liquid control technology and visual dispensing machine equipment are also constantly developing to ultra-high precision control and diversification and specialization.