How to maintain the UV glue sprayer correctly?

Many people may not have a correct understanding of the maintenance methods of the UV glue spraying machine, so today we will give you a detailed explanation of the maintenance methods of the UV glue spraying machine.
1. When replacing the rubber type, it is necessary to clean the pipeline first. First close the feed valve, open the discharge valve, and discharge the remaining rubber material from the rubber bucket, then close the discharge valve, open the feed valve, pour the cleaning solvent into the storage tank, activate the machine, and push the solvent out according to the usual operation method. rinse.
2. The lifter of the quantitative cylinder of the machine needs to be lubricated regularly to increase the service life; regularly (once a week) use a grease gun to add 2-3 guns of high-temperature lithium-based grease to the grease nozzle.
3. If the air intake is abnormal and water vapor is found, please remove the water vapor in the pressure regulating filter or check whether there is any abnormality in the air pressure source.
4. Please wipe clean the machine part regularly to increase the service life.
Maintaining the production equipment well will save you a lot of unnecessary troubles, so that you will not delay normal production due to sudden problems during the production process, and it can also increase the service life of the dispenser.